motorola w510 unlock via SMARTCLIP testpoint

PHONE STATUS:lock to provider (FIDO)


JOB TO DO: unlock (OPEN LINE)


TOOLS: SMART CLIP,SMART CLIP TP CABLE,USB CABLE(V3)

STEP 1:ASSEMBLE TOOLS AS SHOWN ON PICZ..

STEP 2:DISASSEMBLE PHONE AND CONNECT USB..

STEP 3: OPEN SMART MOTO SOFTWARE.
              IN SMART MOTO,CHOSE SMARTCLIP USB PORT(GSM) AS INTERFACE.
              TICK "SMART CLIP" AND CONNECT.
              AFTER CONECT SMART CLIP WILL DETECT AND TICK SEARCH.
              PHONE DETECTED THEN TICK "PREPARE PHONE" AND CHOSE CORRECT MODEL.
              THEN TICK PREPARE PHONE AND FOLLOW NEXT INSTRUCTION THAT WILL
              POP-UP AFTER WARDS.. CONNECT TEST POINTS A AND B AS INSTRUCTED.
HERE SOME LOGS.

            
SmartMoto 4.02
S-Card: 231019901 Smart-Clip dongle, v 3.02, assigned Smart-Clip: 530478174 Europe, initializing... OK
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... found Motorola Phone (W510), getting test interface... clip communication failed
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... found Motorola Phone (W510), getting test interface... clip communication failed
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... found Motorola Phone (W510), getting test interface... clip communication failed
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... could not get USB descriptor
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Connect phone to Smart-Clip before proceeding
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (W510), getting test interface... clip communication failed
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... found Motorola Phone (W510), getting test interface... clip communication failed
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (W510), getting test interface... OK
Model W510
Firmware R452G_G_08.13.09R
Clip serial: 530478174, version: 5.01, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (W510), getting test interface... OK
Model W510
Firmware R452G_G_08.13.09R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F90181480059327E.bk_
Searching for phone... found Motorola Phone (W510), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... Intel - 28F256L18B
Reading flash id/2... Intel - 28F256L18T, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,U3,W5,W490,W510,Z3
Hardware IMEI: 357338011097766
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 357338011097766.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F90181480059327E.bk_
Restore OK
Unlocking phone... OK
 HERE IS THE TEST POINT:

                                          

BEFORE(NOT YET UNLOCK) YOU CAN SEE IT DISPLAYS "CONTACT SERVICE PROVIDER" DUE TO WRONG UNLOCK PROCESS OR WRONG SUBSIDY CODE ENTERED.

AFTER UNLOCK(PHONE HAS BEEN UNLOCKED TO PROVIDER):

                                     MY APOLOGY TO PICTURE'S DATE,I HAVEN'T  SET PROPERLY CAMERA'S DATE..


THANK YOU FOR VIEWING.